Water Tap / Tap System Fitting in Jaipur
Starting from
₹100
About this service
Tap replacements and new installations for Jaipur homes — bathroom basin taps, kitchen sinks, wash-area bibcocks and wall-mounted long-body taps. We isolate water at the angle valve, remove the old fixture, replace the connector and Teflon seal, then test under full pressure for ten minutes before signing off. If the problem is a worn cartridge inside an existing tap, we replace the cartridge rather than the entire fixture — cheaper and faster, and the right call when the chrome body is still in good shape.
Common symptoms we see
- Constant drip even when handle is fully closed
- Loose handle that wobbles or spins
- Reduced flow or sputtering from one tap
- Water hammer thump when the tap shuts
How we do it
- 1Diagnose: cartridge wear vs body damage vs connector leak
- 2Isolate water at the angle valve — no full-house shut-off needed
- 3Replace cartridge / o-ring / Teflon tape, or swap the tap
- 4Test under pressure for 10 minutes; check for drip
Materials we use
Brass cartridges, ceramic disc cartridges, PTFE Teflon tape, food-grade silicone for kitchen taps. Customer-supplied tap bodies welcome.
Typical duration
30–45 minutes for a single tap. Up to 2 hours for a battery of taps in a kitchen or wash area.
Safety & quality
We test the angle valve before starting — failed angle valves are replaced first to avoid surprise floods.
Frequently asked questions
Do you supply the tap or do I buy it?
Either works. Customer-supplied taps are common and we are happy to install them. We can also bring brand options (Jaquar, Cera, Hindware) on the visit.
My tap drips even after a new washer — why?
Usually a worn cartridge or scored seat, not the washer. In Jaipur’s hard water, cartridges scale up faster — replacing the cartridge fixes it.
Can you fit long-body wall taps for the wash area?
Yes. We mark the wall, drill, plug and seat the tap with proper alignment so the spout falls cleanly into the bucket.
Pricing notes
Final price depends on site condition, materials chosen and access. The starting price covers labour for a standard install or repair; material cost is billed at actuals.
- Material cost not included in starting price
- Extra work outside the agreed scope is quoted before we start it
- Customer-supplied fittings welcome