Wall Mixer / Sink Mixer Installation in Jaipur
Starting from
₹500
About this service
Wall mixers for showers and basins, sink mixers for kitchens — single-lever, two-handle and three-way diverter types. We check that hot and cold are positioned correctly (hot on the left), align the wall flanges square, and seat each connection on PTFE tape with the correct number of turns. For sink mixers with pull-out spray heads we anchor the counter-deck with the supplied gasket and run the hose loose under the cabinet so it retracts cleanly.
Common symptoms we see
- Drip from spout even when handle is closed
- Hot and cold mixing wrong way (hot on right)
- Pull-out hose tangling or not retracting
- Loose handle or wobbly mixer body
How we do it
- 1Verify hot/cold positioning and pressure
- 2Fit wall flanges square; PTFE-seal threaded joints
- 3Mount mixer body and torque per spec
- 4Run hot and cold separately, then together; check for crossover
Materials we use
Brass-body mixers (Jaquar, Cera, Hindware accepted), PTFE tape, stainless wall plugs, food-grade silicone for the deck seal.
Typical duration
1 hour for a basin mixer; up to 2 hours for a wall mixer with diverter.
Safety & quality
We pressure-test new mixers under both hot and cold supply — finding a defective unit out-of-box is faster than waiting for a customer call.
Frequently asked questions
My hot tap is on the right — is that wrong?
It is the wrong convention; we can swap supply lines so hot is on the left. Most mixers will work either way but the markings will be reversed.
Single-lever vs two-handle — which lasts longer?
Two-handle if you want to replace washers yourself; single-lever lasts equally long but cartridge replacement is the only repair.
Do you fit customer-supplied imported mixers?
Yes. We check thread compatibility (most imports are G1/2 same as Indian) and adapt with brass adaptors if needed.
Related services
Pricing notes
Final price depends on site condition, materials chosen and access. The starting price covers labour for a standard install or repair; material cost is billed at actuals.
- Material cost not included in starting price
- Extra work outside the agreed scope is quoted before we start it
- Customer-supplied fittings welcome