Tile Epoxy / Grout Filling in Jaipur
Starting from
₹500
About this service
Re-grouting and epoxy filling for tile joints that have failed. Cement grout in bathrooms breaks down over years — water gets behind the tile, the grout darkens, and mould moves in. We rake out the old grout, vacuum the joints, and refill with two-part epoxy grout that is waterproof and stain-resistant. For shower cubicles and wet rooms, epoxy is the right call; for dry-area floors, cement grout is fine.
Common symptoms we see
- Grout lines darkened, soft or missing
- Mould between tiles in shower area
- Water seeping through floor tile to flat below
- Dingy bathroom that needs a quick refresh
How we do it
- 1Rake out old grout to depth
- 2Vacuum and clean joint
- 3Mix and apply two-part epoxy grout
- 4Wipe back excess; final polish at cure
Materials we use
Two-part epoxy grout (Roff, MYK Laticrete), grout-rake tool, vacuum, finishing pads.
Typical duration
1–2 hours for a typical bathroom; cure time 24 hours before use.
Safety & quality
Epoxy is fine on hands but harder to remove from skin than cement — gloves throughout.
Frequently asked questions
Cement grout vs epoxy — does it really matter?
In wet zones, yes. Epoxy stays waterproof and stain-free for years; cement absorbs and discolours.
Can I walk on the floor right after?
No — 12 hours minimum, 24 hours before water exposure.
Will the epoxy match my existing colour?
Standard whites and greys match easily. Custom colours need an extra day of order time.
Related services
Pricing notes
Final price depends on site condition, materials chosen and access. The starting price covers labour for a standard install or repair; material cost is billed at actuals.
- Material cost not included in starting price
- Extra work outside the agreed scope is quoted before we start it
- Customer-supplied fittings welcome